BBQ340SS Front control barbeque grill 1
User Manual for your Baumatic BBQ340SS 30 cm Front control domino barbeque grill hob NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–8 Specifications Product and aperture dimensions Product specifications Electrical details Barbeque hob surface layout 8-9 8 8 8 9 Using the barbeque grill hob Before first use Turning on the grill and setting a power level Using lava rock Hob guidelines 10 10 10 10 10 Cleaning and maintenance Cleaning the barbeque hob top After each use Cleaning the control panel Cleaning the glass surface and aluminium bands 11 11 11 11 11 Installation
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Technical Department. General Information o This appliance is designed for domestic household use and for the grilling and barbequing of domestic foods.
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and should not be allowed to touch the appliance at any time. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times. o Older children should only be allowed to utilise the appliance when supervised. General Safety The appliance should only be installed and connected by a suitably qualified person.
Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be disconnected from the mains and allowed to cool. o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.
should be wiped up immediately, however this may not prevent the hob surface from becoming damaged. Specifications Product dimensions Aperture dimensions Depth: Width: Height: 510 mm 340 mm 45 mm Depth: Width: 490 mm 270 mm Product specifications: o 1 x 2.
For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your hob is located on the underneath of the appliance. Therefore it is a good idea to record this information before you install your appliance. Model Number ………………………………. Serial Number ………………………………. Date of Purchase ……………………………….
Using the barbeque grill hob Before first use IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). o Before using the grid, it is advisable to check that it is firmly positioned and correctly placed on the hob. o Always check that the rubber pads it rests on are intact and properly placed. Turning on the barbeque grill and setting a power level o To turn on the element, rotate the dial clockwise to set a relevant thermostat. The settings range from 1 – 10.
Cleaning and maintenance Cleaning operations must only be carried out when the oven is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the barbeque hob top Any residues that are left on the hob top surface from cleaning agents will damage it. You should remove any residues with water and a little washing up liquid. Abrasive cleaners or sharp objects will damage the hob surface; you should clean it using water and a little washing up liquid.
Installation The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o UK Regulations and Safety Standards or their European Norm Replacements. o Building Regulations (issued by the Department of the Environment). o Building Standards (issued by the Scottish Development Department). o IEE Wiring Regulations. o Electricity At Work Regulations.
Installing the appliance o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: Underneath the appliance there must be a partition made of insulating material (e.g. wood).
a gap of at least 17 mm between the underneath of the appliance and this partition. o IMPORTANT: You must make sure that there is a 5mm gap below the underneath of the worktop at the front edge of the hob for ventilation purposes. The ventilation gap at the rear of the cupboard underneath the hob should also be observed (as shown in the pictures). o Carefully turn the hob upside down and place it on a cushioned mat. o Apply the sealing strip provided around the edge of the appliance.
o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future, particularly if it needs to be serviced. (B) (C) Fixing bracket Screw o Use the fixing bracket that is appropriate for your thickness of worktop. o Place a fixing bracket (B) over the hole in each corner of the underneath of the hob. Then place a screw (C) through the hole and fixing bracket (B).
the underneath of the worktop and the hob. o Fully tighten the screws (C) to secure the hob into position. Electrical connection Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. o This appliance should be wired into a 13 A double pole switched fused spur outlet, having 3 mm contact separation and placed in an easily accessible position adjacent to the appliance.
o The “green-yellow” earth wire must be connected to the terminal marked . It must be about 10 mm longer than the live and neutral wires. o The “blue” neutral wire must be connected to the terminal marked with letter the (N) - the live wire must be connected to the terminal marked with the letter (L).
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Czech Republic Baumatic CR spol s.r.o. Lípovà 665 460 01 Liberec 4 Czech Republic +420 483 577 200 Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 www.baumatic.cz Slovakia Baumatic Slovakia, s.r.o.
