User manual

19
flame failure safety device
ou wish to light and
o the maximum
utomatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
o Once the burner is lit, turn the control knob to your required
o To turn the burner off, turn the control knob fully anti-clockwise
o In case of power failure, the burners can be lit by carefully using
Energy saving ti
N
Automatic ignition with
To ignite a burner:
o Press in the control knob of the
burner that y
turn it clockwise t
depressed, the a
position.
o If you keep the control knob
flame on the burner has lit.
o After this
symbols.
setting between the maximum and minimum setting symbols.
to the gas off position.
a match.
ps
PA S
BURNERS
Minimum
diametre
M
d
aximum
iametre
Wok 220 mm 260 mm
Rapid 180 mm 260 mm
Semi-rapid 140 mm 260 mm
Auxiliary 120 mm 140 mm
o The diametre of the bottom of the pan should correspond to that
of the burner.