BCC600 60cm &HUDPLF &RRNWRS BCC700 70cm &HUDPLF &RRNWRS
Dear Customer, Congratulations on purchasing your new product from Think Appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out Customer Care team on: 1800 444 357 Our Customer Care centre is there to ensure you get the most out of your appliance.
User Manual for your Baumatic BCC600/BCC700 60/70 cm Front 7ouch &ontrol 4 =one &eramic &RRNWRS NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference; for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–8 Specifications Ceramic hob layout Control panel layout 8 – 10 9 10 Using the ceramic hob Before first use Touch controls Switching the hob top on Switching on a zone and setting a power level Switching off a zone Switching off the hob Residual heat indicator Switching on the dual cooking zone Locking the hob top The hob timer Setting a countdown time Safety cut-off 10 - 16 10 10 11 11 11 12 12 12 - 13 14 14 – 15 15 16 Hob guidelines 16
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Customer Care Department. General Information o This appliance is designed for domestic household use and for the cooking and frying of domestic foodstuffs.
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times. o Older children should only be allowed to utilise the appliance when supervised.
Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be VZLWFKHG RII and allowed to cool. o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.
Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will become hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times. o Older children should only be allowed to utilise the appliance when supervised.
Electrical details Rated Voltage: Supply Connection: 230 Vac 50 Hz 30 A Max Rated Inputs: Mains Supply Lead: 6.4 kW 3 core x 4 mm² (not supplied) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be found on your sales invoice. The rating plate of your hob is located on the underneath of the appliance. Therefore it is a good idea to record this information before you install your appliance. Model Number ……………………………….
Control panel layout 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Safety lock button Cooking zone minus button Cooking zone indicator Cooking zone plus button Timer minus button Timer display Timer indicator Timer plus button Dual cooking zone ON/OFF button ON/OFF button Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Cleaning and maintenance” section). o You should switch on one cooking zone at a time, for 5 minutes at the maximum setting.
Switching the hob top on o Press the ON/OFF button (10) to switch on the appliance. o The hob will beep once and all of the cooking zone indicators will light briefly then go out. o This means that the hob has entered stand-by mode. Switching on a zone and setting a power level IMPORTANT: A zone must be selected within 1 minute of switching the hob on. o Press the cooking zone plus button (4) of the zone that you want to use.
Switching off the hob o Once you have switched off all of the cooking zones, you should turn off the hob. o Press the ON/OFF button (10). o It is possible to turn the hob off at any time by pressing the ON/OFF button (10). o The hob will switch off automatically after 1 minute, if none of the zones are in use. Residual heat indicator o After a zone is switched off, the corresponding cooking zone indicator (3) will show a flashing letter “H”.
o Press the cooking zone plus button (4) for the dual circuit zone. o Adjust the zone between power levels 1 and 9, using the plus (4) and minus (2) buttons. By holding down either of these buttons, the value on the zone indicator (3) will adjust up or down. o The central section of the dual cooking zone will switch on. o If you wish to activate the outer section as well, you should press the dual cooking zone ON/OFF button (9). A neon above the button will light.
Locking the hob top o The whole hob top can be locked by pressing the safety lock button (1) whilst the appliance is switched on. o The timer display (6) will show “L0” to indicate that the safety lock feature has been activated. o When the safety lock has been switched on, it will disable any of the other buttons on the control panel, apart from the ON/OFF button (10) . o To disable the safety lock feature, you should press the safety lock button (1) again.
o The timer display will decrease in 1 minute intervals each time the timer minus button (5) is pressed. o If the set time exceeds 99 minutes, the timer display will return to showing 0. o If you press the timer plus (8) and minus buttons (5) simultaneously, the timer display will reset to 0. Setting a countdown time The hob timer can be used as a minute minder at any time without affecting the cooking process or power setting.
Safety cut-off o If one or more of the cooking zones are accidentally left on, a safety cut off will activate after a certain period of time. The length of time depends on the power level that a zone or zones have been set on. LEVEL TIME LIMIT (hours) 1 8 2 8 3 8 4 4 5 4 6 4 7 2 8 2 9 2 o If more than one zone is operating when one of the zones reaches its safety cut-off point, only the zone which has reached its safety cut off point will switch off.
Cleaning o Cleaning of the hob should be carried out on a regular basis. o IMPORTANT: Before attempting to clean the appliance, it should be VZLWFKHG RII and allowed to cool. o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.
Cleaning and maintenance Cleaning operations must only be carried out when the hob is cool. The appliance should be VZLWFKHG RII DQG DOORZHG to cool before commencing any cleaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. You should remove any residues with warm water mixed with a little washing up liquid.
Using a ceramic hob scraper Your appliance will be provided with a hob scraper. The following guidelines should also be followed when using the ceramic hob scraper:- o The scraper should be placed on the ceramic surface at an angle. o Residues should be removed by sliding the blade carefully over the ceramic surface. o The ceramic surface should be wiped with a damp cloth that has been placed in warm water mixed with a small amount of washing up liquid.
Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is located in, during periods of use. This appliance is classified as Class 3 and therefore is to be built into a kitchen unit (depending on size) or 600 mm worktop that is at least 30 mm thick. The following minimum clearance distances must be observed:o 700 mm between the hob surface and the underside of any horizontal surface above it.
Installing the appliance BCC600 BCC700 o Cut a hole in the worktop that corresponds with the drawing shown above. o IMPORTANT: You must observe the ventilation requirements shown in the drawing opposite.
o IMPORTANT: There are ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the work top, when you put the hob into position (see drawing opposite). o Carefully turn the hob upside down and place it on a cushioned mat. o IMPORTANT: Do not use a silicon sealant to seal the appliance against the aperture. This will make it difficult to remove the hob from the aperture in future, particularly if it needs to be serviced.
Electrical connection This appliance must be installed by a qualified person in accordance with W K H U H O D Y H Q W Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. o This appliance must be wired into a 30A fused circuit and placed in an easily accessible position adjacent to the appliance.
o The cable connections must be in accordance with the diagram located on the bottom of the hob (see above). o You should use a good quality screwdriver to carefully, fully tighten ALL of the terminal screws. o If when the hob is first switched on, only two of the zones work, you should recheck that the terminal screws are all fully tightened. This should be done before contacting the Customer Care Department.
o Switch the appliance off at the socket. o Open the terminal block on the underside of the hob. o Unscrew the terminal screws fixing the cable. o Replace the cable with one of the same length and in accordance with the specification given on page 23. o The “green-yellow” earth wire must be connected to the terminal marked . It must be about 10 mm longer than the live and neutral wires.
o A humming sound is heard when a cooking zone is selected. * This is normal; the sound will disappear when the zone heats up. o The cooking zones have become discoloured. * This maybe caused by burnt on remnants of food. This will not affect the working of the appliance. However you should make sure that the cleaning instructions are being followed regularly.
Think Appliances Pty Ltd. 416-424 Barry Rd Coolaroo VIC 3048 Sales Telephone 1300 132 824 Service Telephone 1800 444 357 Website www.thinkappliances.com Applico Ltd. P.O. 92900 Onehunga, Auckland 1061 New Zealand Website www.baumatic.co.nz United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Website: www.baumatic.co.
