Before using your tumble dryer, please read this manual carefully and keep it for future reference. Tumble Dryer OWNER’S MANUAL BCD71 Read This Manual Inside you will find many helpful hints on how to use and maintain your tumble dryer properly. Just a little preventative care on your part can save you a great deal of time and money over the life of your tumble dryer. You’ll find many answers to common problems in the chart of troubleshooting tips.
Dear Customer, Congratulations on purchasing your new product from Think Appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out Customer Care team on: 1800 444 357 Our Customer Care centre is there to ensure you get the most out of your appliance.
Contents Safety information..............................................................................1 Installation......................................................................................... 3 Part description................................................................................. 4 Attention and advice..........................................................................6 Description of controls.......................................................................
Safety information Dry Care Symbols Please pay attention to use the drying machine if the materials of your clothes can not be dried by it or contain the symbols as follows: Dry Normal Not tumble dry normal Line dry / hang to dry Drip dry Dry flat Dry clean Do not dry clean Do not dry In the shade A F Dry clean normal cycle with any solvent Dry clean normal cycle petroleum solvent only Safety notes ! To prevent any damages to your and others' life or property, you have to follow the safety n
Safety information Injury danger 1.Please do not disassemble and install the dryer under no instruction or supervision. 2.Please do not stack this dryer on washing machine without stacking kits. 3.Please do not lean on the opened door of the dryer. 4.Please do not put any pyrotoxin on the dryer, such as the candle, electric cooker. 5.Children should be supervised to ensure that they do not play with the appliance. 6.
Installation Installation Position 1.Please install the dryer on solid and flat ground. 2.Please do not place the dryer on the slope, soft carpet or wooden floor. 3.Please do not install the dryer outdoors, to prevent the dryer from being frozen to damage of machine parts. Level Adjusting If the floor is obviously uneven, it needs to be adjusted. It vibrates the machine, causing machine to move from its position. Using hands to adjust the height of four machine legs to adjust the levelness of this dryer.
Part Description Part Description Control Panel Container Door Power Cord Lint filter Maintenance flap Condenser Accessories The following parts are optional for specific models. If your dryer has following parts, please install them following the instruction below .
200cm Min.80cm Max.120cm Part Description Quick start 1. Open the door and load the laundry 9.Unplug the power cord 8.Turn the knob to “OFF” 2 Close the machine door 7. Clean the lint filter and empty container 3 Plug the power cord 6. Take out the laundry when finished 4.Select the desired programme 5.
Attention & Advice Attention Before the first cycle, the dust and grease may remain in this dryer during the period of manufacture and transportation, to avoid contaminating your clothes, please follow these steps: a)Put some clean rags into the drum. b)Plug the power. c)Select the “Quick” Programme, press “Start/Pause” button. d)After finishing this programme, please follow the “cleaning and routine maintenance” to clean the lint filter and air condenser.
Fliter 7 Tank Digital tube display 2 Anti-Crease This function will give more care to protect sensitive textiles from being creased. Delay/Light This function is used to delay drying process .You can get 1-24hour by pressing this key continuously . The drum light will activate when you press the【Delay/Light】 during the drying procedure. This function will give less heat to protect sensitive textiles from high temperature.
Operation Instruction Programme selector 1.Rotate the programme knob to select the desired programme. 2.Select the【Delay】,【Anti-Crease】or【Gentle】functions for additional option. 3.Press the【Start/Pause】key. The Drying procedure stops The buzzer will prompt from the dryer when finishing the cycle. Rotate the programme knob to the “OFF” position, and pull out the power cable. Consumption values Specifications are approximate values determined under normal conditions. Fluctuations up to 10% are possible.
Cotton Synthetics Weight(max) Skirts/ Work Towelling T-Shirt Shirts Trousers dresses Sportswear clothes Anorak bathrobe Underwear Socks Bed linen 7.0kg (30min/20min) 3.0kg 3.0kg Quick Warm/Cool 3.0kg 3.5kg Delicate Extra Standard Light Table linen For timer programme , delicate textiles made of acrylic fibres or small items. Using 【Time Adjusting】“+” “-” function to adjust time. For washing which is to be dried quickly, e.g. made of acrylic fibres or for individual small items.
Specialty drying function Specialty drying function 1. Instruction of the moisture sensor This function can automatically sense the moisture of clothes, and will automatically adjust the time of drying procedure according to how much clothes you put into the dryer. This function will automatically activate during the drying procedure except the “Warm” and “Cool” programme. 2.
Special drying function icon and no key can effect to the dryer. Under the start state of the child lock button, the【Delay/Light】and 【Anti-Crease】buttons shall be pressed at the same time for over 3 seconds to release the child lock function. 5.
Cleaning and routine maintenance Clean the lint filter Leave the dryer to cool down. 1.Open the machine door. 2.Take out the lint filter, pull upward to take it out. 3.Clean the lint filter; wipe off the scrap threads accumulated on the lint filter. 4.Reinstall the lint filter. NOTE! 1.The lint filter accumulated on the filter will block the air circulation, which will cause the extension of drying time and energy use; therefore, the scrap thread filter shall be cleaned after each use. 2.
Alarm function Alarm function Alarm Problem Alarm Reason Buzzer Alarm Release “ ”Is flashing Water tank full or pump error Check the water tank and pump. “ ”Is flashing Air flow block Check the filter and the air folw “ E30 ” Heater problem “ E34 ” Check the heater and the thermostat The Error Code is Check the Humidity sensor and PCB Humidity sensor error flashing on X:XX at Flash Rate 1 .
Precautions Precautions Repairs may be carried out by customer service of authorised technicians only! Before you call customer service, please check whether you can correct the fault yourself. A technician will charge you for advice, even during the warranty period. Problem Solution Display does not come on The mains plug is inserted. Check the programme selected. Check fuse in the house. “ ”Is flashing Empty condensation container. If failure, check hose for condensation outlet.
Technical Specification Specification Power supply voltage 220-240V~ Rated input Power Rated Frenquency Overall Size 2000W 50Hz 595×565×845(mm) Rated DryingCapacity Net Weight 7.
(AUS) Think Appliances Pty Ltd. 416-424 Barry Rd Coolaroo VIC 3048 Sales Telephone 1300 132 824 Service Telephone 1800 444 357 Website www.thinkappliances.com (NZ) Applico Ltd. Private Bag 92900 Onehunga, Auckland, New Zealand 1061 Website www.baumatic.co.nz (UK) United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Website: www.baumatic.co.
