User manual

o Remove the hob by unscrewing the
rear fixing screws (B) which lock the
hob at the supports (C).
o Unscrew the nuts (E) of the gas
aluminium pipes and pull out the
thermocouple quick connectors (F).
o Unscrew the screws (D) which lock
the crosspieces.
o Unscrew the screws (G) which unite
the bridles of the taps to the front
frame.
o Slip the ramp towards the back part
and unscrew the screws (D) in order
to free the taps.
o Change the seal each time a tap or a
thermostat is replaced. This will
ensure perfect retention between the
tap or a thermostat and part.
o Reassemble all the parts following the same procedure but in the
reverse order.
My appliance isn’t working correctly
o The oven isn’t coming on.
* Check that the oven is in manual operation mode.
* Check that you have selected a cooking function and a cooking
temperature.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
* Check that the operating instructions for setting the time of day
and putting the appliance into manual operation mode have been
followed.
41