User manual

16
o IMPORTANT: If you have not turned the oven function selector
ntrol knob to their OFF positions, when
you reset the oven it will continue to heat.
ing symbol (5) will go out.
o If you are half way through programming the timer and would
start again, press and hold the program
button (10).
Changing the time of day
n mode.
int
button (10) to confirm the hour.
rect
minute of the day. Press the program button (10) to confirm
the minute.
o The decimal point will stop flashing and the time will be set.
knob and thermostat co
Cancelling a timer function
o Press and hold down the plus button (9) and the programme
button (10) simultaneously, until you hear a beep. The
automatic cook
like to cancel it and/or
o IMPORTANT: The oven timer/programmer must not be in any
form of countdow
o Press and hold down the minus (11) and plus (9) buttons
simultaneously for three seconds (or until the decimal po
starts to flash).
o Whilst the decimal point symbol (7) is flashing, use the plus (9)
and minus (11) buttons to set the correct hour of day. Press
the program
o Then use the plus (9) and minus (11) buttons to set the cor