User manual

11
Control Panel
o The control panel can be located by opening the drawer of the
appliance. It is on the right hand side.
o When the button is pressed in (position 1), then the drawer is
switched on. When the button is popped out (position 0), the
drawer is turned off.
o After switching on the appliance and closing the warming
drawer, you can tell whether it is switched on and off by looking
at the light on the front of the warming drawer. If the light is lit,
then the warming drawer is on.
Using the warming drawer
Before first use
o Clean the surfaces with a soft damp cloth.
o To remove any residue from the warming drawer that may have
been left from the manufacturing process, you should turn the
control knob to the maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave the warming drawer on the maximum setting
for 2 hours.