Operating instructions

BAUMATIC BDW45.1 dishwasher user manual
24
ERROR CODES - WHAT THEY MEAN
* YOUR DISHWASHER MAY EXPERIENCE A FAULT. SHOULD THIS HAPPEN, A
CODE CONSISTING OF ‘E’ & A NUMBER FROM 1-7 CAN BE DISPLAYED.
USE THIS TABLE TO UNDERSTAND WHAT IS WRONG.
*NOTE*: ALWAYS CALL FOR A Baumatic Ltd ENDORSED / APPROVED
SERVICE TECHNICIAN TO CARRY OUT REPAIRS.
CODE SYMPTOM: CAUSE: WHAT TO DO:
‘E1’
LONGER FILL TIME. FAUCET IS NOT OPENED.
Ensure that inlet hose is not
kinked or crushed.
‘E2’
LONGER or EXTENDED DRAINING TIME
THE DRAIN PIPE WAS PLACED
TOO HIGH WHEN IT WAS
INSTALLED.
Ensure drainage system is as
per manual and not extended.
‘E3’
LONGER HEATING TIME – NOT
REACHING REQUIRED TEMPERATURE
MALFUNCTION OF
TEMPERATURE SENSOR OR OF
HEATING ELEMENT.
CALL FOR A QUALIFIED SERVICE
TECHNICIAN.
‘E4’
OVERFILLED
TOO MUCH INLET WATER.
*NOTE * - THERE ARE
NUMEROUS CAUSES OF AN ‘E4’
MESSAGE. REFER TO
APPLIANCE USAGE SECTION OF
THIS MANUAL FOR GUIDELINES
ON HOW TO PREVENT AN
OVERFILL.
Overdosing. 3-in-1 put in
with salt and/or rinse aid in
the appliance =overdose.
Could also be a Water
Pressure problem.
‘E6’
OPEN CIRCUIT THERMISTOR.
CALL FOR A QUALIFIED SERVICE
TECHNICIAN.
‘E7’
SHORT CIRCUIT THERMISTOR.
CALL FOR A QUALIFIED SERVICE
TECHNICIAN.
WARNING!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL OR
SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
24