Operating instructions

BAUMATIC BDW45.1 dishwasher user manual

ensure they’re at the proper tension so that the door can open and close smoothly

and conveniently.

Note: If you have installed a cover panel over the door, you will have to adjust the

door spring tension.

• Using an Allen key, rotate the adjusting screw to tighten or slacken

the steel cable. You must do this or damage to your dishwasher

may result.

The door’s spring tension is good when the door remains horizontal in the fully

opened position, yet rises to a close with the slight lift of a finger.

Warning: failure to adjust the door spring

tension could result in damage to your

dishwasher!

d) NEXT, CONNECT THE WATER INLET

(SEE FIGURE

BELOW):

Connect the cold water supply hose to a threaded

¾ inch connector and make sure that it is

fastened tightly in place.

Attach tube C

to the cold water supply A.

If the water pipes are new or have not been used

for a long time, let the water run to make sure

that the water is clear and free of impurities. The

water inlet may get blocked and damage the