Operating instructions

BAUMATIC BDW45.1 dishwasher user manual
32
h) THEN, APPLY THE CONDENSATION STRIP.
The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose is
to deflect steam rising from your appliance to
protect your worktop’s underside.
• The strip is located inside your
dishwasher.
• Ensure the surface is clean prior to
sticking to underside of the worktop.
• Separate the backing paper from the
strip.
• Stick to the underside of the worktop.
Note
: Failure to attach strip could
result in damage to the underside of
your work surface!
i) NOW YOU ARE READY TO PUSH THE DISHWASHER
INTO POSITION
(SEE FIGURE BELOW):
j) NOW GET THE DISHWASHER LEVEL.
NOTE: YOUR
DISHWASHER MUST BE
LEVEL FOR PROPER
DISH RACK OPERATION
AND WASH
PERFORMANCE.
32
NOTE –
MAKE SURE YOU HAVE TH
E
DISHWASHER ON ITS SLIDE RAILS
(STEP 4 IN ILLUSTRATION ON RIGHT).
THEN MOVE IT INTO THE CABINET
RECESS (AS PICTURED ON RIGHT).
ENSURING THAT IT IS BACKED UP
A
GAINST THE WALL. ATTACH THE
FURNITURE DOOR (STEP 1 AS
PICTURED ON RIGHT) IF YOU HAVE
NOT ALREADY DONE SO.
YOU ARE NOW READY TO SECURE
YOUR APPLIANCE TO THE CABINE
T
A
REA (STEP 8 AS PICTURED ON
RIGHT) & (STEPS 2 & 7 AS PICTURED
ON RIGHT).
SEE p. 33 FOR FURTHER
INSTRUCTIONS AS TO HOW TO
ACCOMPLISH THESE.