User manual

23
o After approximately 10 seconds the dishwasher will continue the
etting a delay start
o You can delay the start of the washing cycle by programming the
structions in the “Setting a wash program”
section. After loading the basket, filling the detergent
selecting a program you should then set the
delay start before closing the dishwasher door.
peatedly to scroll
through the time options. When the required time delay is lit on
t the end of a wash cycle
o Before opening the dishwasher door you should press the power
supply.
o IMPORTANT: You should wait about 15 minutes before
still hot and more susceptible
to breakage. They will also dry better.
so care should be taken.
washing program.
S
dishwasher to begin after 3, 6, 9 or 12 hours.
o To program a delay start you should load the dishwasher
according to the in
compartment and
o To do so, press the delay start button (4) re
the display you should release all button and then close the
door.
o The delay start indicator (5) will display the programmed time.
A
o When the washing cycle is complete, a buzzer will sound for 8
seconds and then switch off.
switch (1) to turn the appliance off and shut off the water
unloading the dishwasher to avoid handling the dishes
and utensils while they are
o WARNING: Hot steam may escape when the door is first
opened,
o It is normal for the dishwasher to be wet inside after a program.