User manual

28
DISPOSE OF ALL PACKAGING IN AN ENVIRONMENTALLY
the dishwasher into a kitchen cabinet
FRIENDLY MANNER.
Installing
o
o
o You must ensure that there is a hole to feed the electrical cable
through. There must also be holes left to connect the appliance
to your mains water supply and to your drain outlet. These steps
must be done before commencing the rest of the installation
process.
o IMPORTANT: The stop valve for your water supply MUST be
Before proceeding with the rest of the installation, you must
Ensure that the aperture that you will be fitting the dishwasher
into is of the size given in the diagram above.
Ensure that the rear panel of the furniture housing unit has been
removed and that the ventilation cut out shown is adhered to.
easily accessible during an emergency.
o
connect the inlet hose and the outlet hose to the rear of the
appliance. See the relevant section of this manual.