Owner's Manual

35
at on
9 DO NOT REMOVE THE RATING PLATE AS THE
The moulded plug that is supplied with the appliance must be
Broken or damaged power leads must only be replaced by a
9 IMPORTANT: We do not recommend that this appliance is
.
o
your appliance, away from the
underneat
9 Consult the rating plate, located on the right hand side of the
drop down door BEFORE making the electrical connections.
Ensure that the voltage reaching the plug is the same as th
the rating plate.
INFORMATION ON IT IS IMPORTANT.
9
placed into an earthed and insulated socket.
9
suitably qualified person. A power lead of a similar type must be
used in replacement.
9 Power lead type – H 0 V V – F 3G 1,5.
connected to an extension lead
Applying the condensation strip
The condensation strip must be fitted to the underside of the
worktop to protect it against the ingress of moisture. The strip
will deflect steam that rises from
h of the worktop.