User manual

25
leaning the door
o To clean the edge a ide of the door, you should use
a soft, damp cloth only.
e a spray cleaner of any kind.
C
round the outs
o To prevent water from penetrating the door lock or electrical
components, DO NOT us
o DO NOT use any abrasive cleaner or scouring pads on the inner
or outer surfaces, as they may cause damage to them.
Error code failure system
If your appliance senses that it
combination of the program indica
is not operating correctly, then a
tor neons may flash.
FROM YOUR MAINS
OWER SUPPLY.
ected fill time.
Check the water pressure of your mains water supply.
let hose.
kinked or crushed.
to is turned
extended drain time.
The drain pipe may be placed in too high a position or incorrectly.
nsure that the installation is
ngth.
The following error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED
P
Intense wash indicator neon flashes
o Longer than exp
9
9 Clean the mesh filter that sits in the in
9 Ensure that the inlet hose is not
9 Make sure the water tap that the machine is connected
on fully.
Economy wash indicator neon flashes
o Longer or
9
Check the installation instructions and e
correct.
9 Check that the outlet hose is not kinked or crushed.
9 Make sure that the drain hose has not been extended beyond its
original le