Operation Manual

25
Setting a delay start
It is possible to delay the start of the wash program for up to a
maximum of 24 hours.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
accordance with the loading instructions.
o Push the top and bottom baskets fully back into position.
o Add detergent
o Turn the appliance on by using the ON/OFF button.
o Press the relevant program selection button to choose an
appropriate wash program for the load that you are washing.
The light above the program selection button that you have
pressed will come on.
o Use the delay start buttons to set the amount of time that you
want to delay the wash program by. The time that you have
selected will appear in the LCD display. You can adjust this time
up and down by pressing the delay start button with the relevant
arrow above it.
o You can delay the start of the wash cycle by a maximum of 24
hours. Each time you press a button, the delay start time will
adjust by one hour.
o Close the door firmly, so that you hear the door lock click shut.
o Once the period of time that you set has passed, the dishwasher
will start the wash program that you selected.
Setting a half load
The half load option means that the lower spray arm does not run.
IMPORTANT: You should only load items in the upper
basket when using the half load option.
o Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top basket, and then load it in accordance with the
loading instructions.