Operation Manual

BAUMATIC BDW2W / BDW2SS dishwasher user manual
12
12
STARTING A WASH CYCLE
1) MAKE SURE THAT THE PLUG OF THE APPLIANCE IS INSERTED INTO THE WALL SOCKET.
2) MAKE SURE THAT THE WATER SUPPLY IS TURNED ON TO FULL PRESSURE.
3) LOAD THE DISHWASHER (SEE THE SECTION ENTITLED ‘LOADING YOUR DISHWASHER’).
4) POUR IN DETERGENT (SEE THE SECTION ENTITLED ‘SALT, DETERGENT & RINSE AID’).
5) TURN THE KNOB LOCATED ON THE RIGHT OF THE CONTROL PANEL CLOCKWISE UNTIL
THE DIAL POINTS TO THE SYMBOL FOR THE CYCLE SETTING. SEE THE ‘WASH CYCLE
TABLE’ ON THE NEXT PAGE.
6) PRESS THE ON/OFF BUTTON – THE ON/OFF LIGHT WILL TURN ON. AT THIS POINT, THE
WASH CYCLE WILL BEGIN.
.
Approximate Timing of Wash Cycles
Intensive
(strong) 120
mins.
Normal
114
mins.
Economy
93
mins.
Rinse
80
mins.
Glass
53
mins.
Rapid
30
mins.
Soap
7
mins.