User manual

21
etting a wash program
ake sure that the before first use section has been
Check whether the appliance needs rinse aid or salt adding to it.
o Pull out the top and bottom baskets, then load them in
o Push the top and bottom baskets fully back into position.
o Add detergent
Turn the appliance on by using the ON/OFF button.
IMPORTANT: Wait for 5 seconds before pressing the
Press the program selection button to choose an appropriate
o Select any program options that you want to use (e.g. delay
o Close the door firmly, so that you hear the door lock click shut.
o After a few seconds, you will hear the appliance begin to fill with
hanging the wash program
MPORTANT: This should only be attempted when the cycle has
o Slightly open the door of the appliance and turn off the power
o Wait for a minute before fully opening the door of the appliance.
o Turn the appliance on by using the ON/OFF button and wait for 5
S
M
followed.
o
accordance with the loading instructions.
o
o
program selection button, otherwise the appliance may
not function correctly.
o
wash program for the load that you are washing. The relevant
program indicator neon will light to show which program you
have selected.
start).
water and the wash program will have started.
C
I
only just started, otherwise the detergent tablet may have
already released or you could have hot water escaping.
using the ON/OFF button.
seconds before pressing the program selection button.