User manual

11
sing your dishwasher U
Before first use
Install the applianceo as per the installation instructions contained
asher salt. After this you should set the water
then set the rinse aid dosage.
illing wi
e (in particular table salt), it will damage
overflowed from the water softener during the salt
he lower
r cap
e of water into the water
softener.
o this when you fill the
h first time.
5 kg of salt into the
water softener.
within this booklet.
o Fill the water softener with 1 litre of tap water and then fill with
specialist dishw
softener level.
o Fill the rinse aid dispenser and
F th dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the applianc
the water softener.
o Ideally you should fill the water softener with salt, just before you
are about to run a wash program. This will help to clear any salt
that may have
filling process.
o Open the door of the dishwasher and then remove t
basket. The basket should be empty when you remove it.
Turn the water softeneo
anticlockwise and remove it.
Pour 1 litro
IMPORTANT: It is only necessary to d
container with salt for t e
o Pour salt into the water softener,
using the funnel that is supplied with
the appliance. You should add
approximately 1.