User manual

22
IMPORTANT: Wait for 5 seconds before pressing the program
Press the program selection button to choose an appropriate wash
indicator neon will light to show which program you have selected.
Select any program options that you want to use (e.g. delay start).
lock click shut.
l hear the appliance begin to fill with
water and the wash program will have started.
MPORTANT: This should only be attempted when the cycle has
rgent tablet may have
lready released or you could have hot water escaping.
Press and hold down the program selection button for 3 seconds to
choose the correct wash program.
Select any program options that you want to use (e.g. delay start).
lock click shut.
hear the appliance begin to fill with
water and the wash program will have started.
t the end of a wash program
A buzzer will sound for 8 seconds.
re unloading
the dishwasher to avoid handling items which will still be very hot
r if they
washer before unloading.
o Open the door of the appliance and unload the dishwasher.
o
selection button, otherwise the appliance may not function
correctly.
o
program for the load that you are washing. The relevant program
o
o Close the door firmly, so that you hear the door
o After a few seconds, you wil
Changing the wash program
I
only just started, otherwise the dete
a
o Slightly open the door of the appliance.
o Wait for a minute before fully opening the door to ensure the spray
arms have stopped working, and to avoid scalding.
o
cancel the wash program. Then use the program selection button to
o
o Close the door firmly, so that you hear the door
o After a few seconds, you will
A
o
o Use the ON/OFF button to switch the dishwasher off.
o We would advise waiting for at least a few minutes befo
and more susceptible to breakage. Items will also dry bette
are left for longer in the dish