User manual

27
leaning the spray arms
s
d take out the washer
that sits on top of the spray arm.
.
o Rinse the spray arm thoroughly and
then reassemble the spray arm back
in its original position.
leaning the control panel
ot use any abrasive cleaner or household polish on
ither the control panel or operating parts.
control panel using a brand new damp cloth with
warm water.
leaning the door
ould use
a soft, damp cloth only.
electrical
components, DO NOT use a spray cleaner of any kind.
leaner or scouring pads on the inner
or outer surfaces, as they may cause damage to them.
C
The spray arms should
deposits from clogging the
be cleaned regularly, to prevent hard water
pray arm jets and bearings.
o To remove the spray arm, unscrew
the nut an
o Gently pull upwards to remove the
spray arm
o Wash the spray arm in warm, soapy
water and use a soft brush to clean
the jets.
C
IMPORTANT: Do n
e
o Wipe over the
C
o To clean the edge around the outside of the door, you sh
o To prevent water from penetrating the door lock or
o DO NOT use any abrasive c