User manual

29
OFF THE APPLIANCE;
DISCONNECT THE APPLIANCE FROM YOUR MAINS
DS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN
N ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.
al trou
PROBLEM POSSIBLE HAT TO DO
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ABOVE ADVICE AND CLEARING THE FAULT
CODE. YOU SHOULD TURN
SUPPLY. THEN ARRANGE FOR AN ENGINEER TO
ATTEND THE APPLIANCE. YOU SHOULD CONTACT
THE CUSTOMER CARE DEPARTMENT ON TELEPHONE
NUMBER [phone].
IF AN ENGINEER ATTEN
CAUSED BY A
erGen bleshooting
CAUSE
S
W
Dishwasher
doesn’t
run
r the
ircuit breaker has
ipped
ower supply is not
witched on
losed
es that are sharing the same
rcuit with the dishwasher.
that the dishwasher is
rned on Make sure that the power
ll
Fuse blown o
c
tr
P
s
Door not c
Water pressure is
low
Replace the fuse or reset the circuit
breaker. Remove any other
applianc
ci
Make sure
tu
cord is fully plugged into the wa
socket.
Check that the door is closed
securely.
Check that the water supply is
connected properly and that the
water is turned on.
Drain pump
doesn’t stop
verflow n
run
is power to the appliance.
O The system is designed to detect a
overflow. If it does, then it will
the drain pump continuously when
there
Noise ome audible sounds
re normal
tensils are not
ecure in the baskets
small
has dropped into the
basket
ou will get a level of operating noise
uring a wash cycle, in particular
ispenser places the tablet into the
b.
nsure that everything is loaded as
er Baumatic’s loading instructions.
S
a
U
s
or something
Y
d
when food is being removed from
items and when the detergent
d
tu
E
p