COFFEE MACHINE BEC1SS 1
INDEX 1. DESCRIPTION OF THE COFFEE MACHINE (Fig A) 2. DESCRIPTION OF THE CONTROL PANEL (Fig B) 3. GENERAL 4. INSTALLATION 5. INSTRUCTIONS FOR FIRST USE 6. COFFEE DISPENSING 7. STEAM PUSH-BUTTON 8. EMPTY WATER TANK 9. ADJUSTING THE FLOW OF WATER FROM THE BOILER 10. USE OF COFFEE PODS 11. MAKING A CUP OF ESPRESSO 12. PREPARING A CAPPUCCINO 13. MAKING A CUP OF TEA USING LOOSE TEA LEAVES 14. MAKING TEA USING HOT WATER 15. CLEANING AND SERVICING 16.
1.DESCRIPTION OF THE COFFEE MACHINE (Fig A) (Fig A) 7 15 11 13 1. Filter Holder for Coffee Pods 2. Filter Holder for Ground Coffee 3. 1-cup Filter 4. 2-cup Filter 5. Water Filter 6. Coffee Pressing Tool 7. Water Reservoir Door 8. Scoop 9-15. Steam Pipe 10. Water Reservoir 11. Drip Tray 12. Allen Key for screw blocking 13. Filter 14.Single-cup filter holder 15.Removable panel 16. On/Off Switch 17. LED Lights 18. Filter-holder ring nut 21. Froth Maker 22.
2. DESCRIPTION OF THE CONTROL PANEL (Fig B) 1. Power ON LED 2. LED indicating coffee boiler heating and ready for use 3. LED indicating Steam Boiler heating and ready for use 4. Steam Release LED 5. LED indicating empty water reservoir 6. Coffee dispensing button 7. Steam Boiler On/Off button 8. Steam Release button 8. Coffee boiler water flow adjustment knob 3.
Fixing the coffee machine to the unit • • Mark on the piece of furniture the measure for the positioning of the blocking supports. Fig. C-1 • • Fix to the piece of furniture the blocking supports. Fig. C-2, C-3, C-4 • • • • Place the coffee machine on the piece of kitchen furniture so to be installed. The holes of the blocking screws are: Inside the area of the water reservoir. On the back of the removable panel(Fig A-15).To remove it, follow the instructions given by the figures. Fig.
• • • Remove reservoir from cabinet (Fig A-10) Fill up reservoir with fresh water and place back in the cabinet, shut door(Fig A-7) Ensure that the filter (Fig A-5) has been placed in cold water for a few minutes prior to first use. Fig. D-1, D-2, D-3 If the coffee machine has not been used for long periods of time, change the water in the reservoir.
• • • • • • Insert one pod into the filter-holder (Fig A-1) and place into the ring nut (Fig A-18) making sure that it is correctly secured by turning the filter-holder handle from left to right. Put the cup underneath the nozzle (Fig A-1). Check the red LED light of the boiler (Fig B-2) is not flashing. Push the coffee button (Fig B-6). Pressing (Fig B-6) again will stop dispensing. Take the filter-holder out of the ring nut and remove the pod. 11.
• • • • Check the red LED light of the boiler (Fig B-2) is not flashing. Push the coffee button (Fig B-6). Pressing (Fig B-6) again will stop dispensing. Take the filter-holder out of the ring nut and clean filter holder. 14. MAKING TEA USING HOT WATER • • • • • Place the steam nozzle (Fig A 9-15) onto the holding nut (Fig A-22) Put a cup underneath the steam pipe (Fig A 9-15) Turn machine on (Fig A-16) Push the steam button on/off (Fig B-7). An LED will flash (Fig B-3) while the boiler heats up.
• • • • • • • Material discoloration, corrosion. Incorrect installations, modifications or repair by any unauthorised personnel. Use of non-Baumatic parts. Damage caused by foreign objects or substances. Appliances used for non-domestic use. Operation on unsuitable voltage, water or gas supplies. Accidents, Civil war, acts of God or any cause beyond the control of Baumatic Ltd.
