User manual

11
Setting the time of day
o When the cooker hood lights have not been turned on and a
motor speed has not been selected, you are able to set the time
of day shown on the LCD display.
o Press and hold the timer button for about 3 seconds to enter the
time setting mode. “12:00” will appear on the display and the
“12” will flash.
o Use the speed selection button to increase the hours shown or
the light on/off button to decrease the hours shown.
o When the correct number of hours is shown on the display, press
the timer button again to confirm. The “00” will flash.
o Again, use the speed selection button to increase the minutes
shown or the light on/off button to decrease the minutes shown.
o When the correct number of minutes is shown on the display,
press the timer button to confirm and set the time of day.
Cut off timer
o When a motor speed has not been selected you are able to
program a delay timer function which allows you to set a
countdown time for the hood to automatically switch off after.
o You can program the delay timer from 1 to 60 minutes.
o Press the timer button to enter the delay timer setting mode.
The LCD display will show “05:00”.
o Use the speed selection button to increase the number of
minutes shown and the light on/off button to decrease the
number of minutes shown.
o When the display shows the desired countdown time, press the
timer button again to confirm. The countdown will begin
immediately on the display.
o You can then proceed to select a motor speed.
o When the countdown time reaches “00:00” the cooker hood will
automatically switch off and the LCD display will return to
showing the time of day.
o The next time you press the timer button to set a delay timer
function, if the countdown time is not changed, the hood will