User manual

1) Switch off the appliance and unplug it. Remove all contents and

shelving.

2) Tilt the appliance backwards by no more than 45°. You may find

it easier to lay the appliance on its back, however you will need

to let the appliance stand for 6 hours before turning it on should

you do this.

3) Remove the lower hinge by unscrewing the securing screws.

4) Pull the door downwards towards the bottom of the appliance,

releasing the top of the door from the top hinge-pin. Place the

door somewhere safe from damage.

5) Unscrew the two screws on the top hinge

and remove it. Re-attach the hinge to the

opposite side of the appliance.

6) Remove the hinge-pin hole cap from the top of the door and

insert it into the existing hinge-pin hole in the opposite side,

thus exposing the new hinge-pin hole and covering the old hole.

7) Unscrew the plastic hinge-pin receiver from the

bottom of the door and relocate it to the

opposite side. There are pilot groves for the

screws on the opposite side.

8) Reposition the door back onto the appliance, slotting the door

onto the hinge-pin protruding from the top of the appliance.