Operation Manual

Attaching the door handles
1) You will find the two handles for the fridge
freezer at the rear of the appliance, behind the
condenser. You should remove this box and
take out the two lengths of handle.
2) Inside of the salad drawer
you will find a box containing
the following components that
you will need to fit the door
handles.
3) Note that the brackets that
go either end of each handle
are marked with a T and a U.
One marked with a T should go
on the top of a handle and one
marked with a U should go on
the underneath of a handle.
4) Place a bracket on either end
of each handle and then using
a screwdriver; fix the brackets
with the screws provided. Make
sure that these screws are fully
tightened.
IMPORTANT: Make sure that
the brackets are at the correct
end of the handles.
22