Operation Manual

5) There are slots at the top and bottom
of each door. Insert the handles into
these slots.
IMPORTANT: Make sure that you have
the handle the right way up; i.e. that the
bracket marked with a T is at the top of
the door and the bracket marked with a
U is at the bottom of the door.
6) Use the allen key supplied to fully
tighten the screws at the top and
bottom of the handle.
Repeat these steps so that both the
fridge and freezer handles are
connected to the appliance.
o If you have reversed the door of the appliance, then you will
need to fit the handle to the opposite side of the door.
o Use a thin bladed screwdriver to remove the plastic spacers at
the top and bottom of the door.
o The plastic spacers should be transferred to the diagonally
opposite corner of the same door, where there will be a cut out
to insert each spacer.
23