User manual

o Once you have taken action to rectify the problem that has
caused the fault code to appear, plug the machine back into your
mains supply and restore the power.
o Turn the machine on using the ON/OFF button and wait for 5
seconds before trying to select a wash program.
IMPORTANT: If any other fault code appears in the
display window, you should not attempt to clear it yourself
and contact the Baumatic Service Department.
IF THE FAULT CODE REAPPEARS AFTER FOLLOWING
THE ABOVE ADVICE AND CLEARING THE FAULT
CODE. YOU SHOULD TURN OFF THE APPLIANCE;
DISCONNECT THE APPLIANCE FROM YOUR MAINS
SUPPLY. THEN ARRANGE FOR AN ENGINEER TO
ATTEND THE APPLIANCE. YOU SHOULD CONTACT
BAUMATIC SERVICE ON TELEPHONE NUMBER (0118)
933 6911.
IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN
CAUSED BY AN ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.
Other fault codes that require engineer visits
Normal and eco indicator light flickering
o Longer heating time than normal but appliance not reaching the
required temperature.
9 Malfunction of temperature sensor or of the heating element.
9 Call Baumatic Service Department.
Strong and normal indicator light flickering
o Failure of temperature sensor
9 Short circuit or malfunction of temperature sensor.
9 Call Baumatic Service Department.
27