User manual

33
9 Consult the rating plate, located on the right hand side of the
on
9 DO NOT REMOVE THE RATING PLATE AS THE
9 The moulded plug that is supplied with the appliance must be
9 Broken or damaged power leads must only be replaced by a
be
9 Power lead type – H 0 V V – F 3G 1,5.
9 IMPORTANT: We do not recommend that this appliance is
efore first use
ou should check the following before using the appliance for the first
o That the dishwasher is level and fixed in position.
end of the drain or inlet hoses.
n filled with 1 litre of water and
o the rinse aid dispenser has been filled.
drop down door BEFORE making the electrical connections.
Ensure that the voltage reaching the plug is the same as that
the rating plate.
INFORMATION ON IT IS IMPORTANT.
placed into an earthed and insulated socket.
suitably qualified person. A power lead of a similar type must
used in replacement.
connected to an extension lead.
B
Y
time:-
o That the water tap is fully open.
o That there are no leaks at either
o That the inlet and outlet hose are fully tightened.
o That the inlet and outlet hoses are not kinked.
o That the power is switched on.
o That the water softener has bee
salt.
That