Operating instructions

BAUMATIC BFD47SS dishwasher user manual
10
***NOTE ***: THE U PPER RA CK HAS
SI DE FLAPS (PICTURED AT LEFT ABOVE BASKET) .
TH ERE ARE 4 (2 ON EACH SIDE) .
TH ESE CAN BE ADJUSTED INTO 2
POSITION S = POSITI O N 1 (H IG H)
A
N D POSITI O N 2 (LOW).
TO MOVE THE FLA P S BETWEEN THE S E
PO
SITIONS, FIND TH E LARGE H ING ES
CLASPIN G EACH FL AP T O TH E UPPER
RA CK . THERE A RE TWO OF TH ESE AT
EIT
HER END OF E A CH FLAP. GENT L Y PULL
B
OTH C LAS P S O FF THE WI RE RA C K A N D
M
O VE THE FLAP TO THE DESIRED
PO SI T I ON . BE CAREFUL IF YO U HA VE
LO NG F ING ER NAI LS!
POSITION 1
THE UPPER POSITION WILL ACCOMMODATE ITEMS SUCH AS GLASS TUMBLERS
(PLACED
BENEATH FLAP) AND WINE GLASSES. WINE GLASSES CAN BE PLACED
UPSIDE
DOWN SO THAT THE NECK NESTLES SNUGLY IN THE GROOVES AT SIDE OF
FLAP
WITH THE BASE OF THE GLASS FACING UPWARD.
POSITION 2
WHEN THE FLAPS ARE MOVED TO THE LOWER POSITION, THEY CAN BE USED TO
HOLD
ADDITIONAL TUMBLERS, CUPS AND MUGS. ALWAYS CHECK THAT YOU ARE
ONLY
PLACING ITEMS ON THE FLAPS THAT WILL CLEAR THE CEILING HEIGHT OF
YOUR
DISHWASHER WHEN YOU PUSH THE RACK BACK IN. BE PARTICULARLY
CAREFUL
WITH LONG-STEMMED GLASSWARE SUCH AS CHAMPAGNE GLASSES –
BREAKAGE HAZARD!
HOW TO LOAD THE LOWER RACK:
P LACE LA RGE I TE MS THAT ARE HARD TO CLEAN IN THE L O W ER RACK : eg . POTS, PANS,
LIDS,
SERVING DISHES, BOWLS.
1. OVAL PLATTER.
2. DINNER PLATES.
3. SOUP PLATES.
4. DESSERT
DISHES.
5. CUTLERY
BASKET .
• POTS, SERVING BOWLS, ETC. MUST ALWAYS BE PLACED UPSIDE DOWN.
• DEEP POTS SHOULD BE SLANTED TO LET WATER FLOW OUT.
• THE BOTTOM RACK FEATURES FOLD DOWN BASKETS SO THAT LARGER OR MORE POTS
& PANS CAN BE LOADED.
10