Operating instructions

BAUMATIC BFD47SS dishwasher user manual
22
ERROR CODES - WHAT THEY MEAN
* YOUR DISHWASHER MAY EXPERIENCE A FAULT. SHOULD THIS HAPPEN, A
CODE
CONSISTING OF ‘E’ & A NUMBER FROM 1-7 CAN BE DISPLAYED.
USE O NDERSTAND WHAT IS RONGTHIS TABLE T U W .
*NOTE* : ALWAYS CALL FOR A Baumatic Ltd ENDORSED / APPROVED
SERVICE TECHNICIAN TO CARRY OUT REPAIRS.
CODE SYMPTOM: CAUSE: WHAT TO DO:
Ensure that inlet hose is not
‘Err1’
LONGER FILL TIME. FAUCET IS NOT OPENED .
kinked or crushed .
THE DRAIN PIPE WAS PLACED
TOO HIGH WHEN IT WAS
INSTALLED .
Ensure drainage system is as
‘Err2’
per manual and not
LONGER or EXTENDED DRAINING TIME
extended .
MALFUNCTION OF
TEMPERATURE SENSOR OR OF
HEATING ELEMENT.
LONGER HEATING TIME – NOT
REACHING REQUIRED TEMPERATURE
CALL FOR A QUALIFIED
‘Err3’
S ERVICE TECHNICIAN.
TOO MUCH INLET WATER.
Overdosing. 3-in-1 put in
with salt and/or rinse aid in
*NOTE * - THERE ARE
NUMEROUS CAUSES OF AN ‘E4’
MESSAGE. REFER TO
APPLIANCE USAGE SECTION
‘Err4’
t
OVERFILLED
he appliance =overdose.
OF THIS MANUAL FOR
GUIDELINES
ON HOW TO
PREVENT AN OVERFILL.
Could also be a Water
P ressure problem.
‘Err6’
SHORT CIRCUIT OR SENSOR
BREAK
OF TEMPERATURE
CALL FOR A QUALIFIED
ABNORMAL TEMPERATURE
S
‘Err7’
ERVICE TECHNICIAN.
WARNING!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR
SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
22