Operation Manual

BAUMATIC BFD63SS dishwasher user manual
18
BEFORE YOU CALL FOR SERVICE …
CHECKING AGAINST THE CHARTS BELOW MAY FIX YOUR PROBLEM.
18
PROBLEM POSSIBLE CAUSES WHAT TO DO
Fuse blown, or the
circuit breaker acted
Replace fuse or reset circuit
breaker.
Remove any other appliances
feeding from the same socket as
the dishwasher.
Power supply is not
turned on
Make sure the dishwasher is turned
on and the door is closed securely.
Dishwasher
doesn’t run!
Water pressure is low
Check that the water supply is
connected properly and the water is
turned on.
Drain Pump
doesn’t stop!
Overflow
The system is designed to detect an
overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump. Call a Baumatic
Ltd approved technician.
Some audible sounds
are normal
Sound from soft food shredding
action and detergent cup opening.
This is not a problem.
Utensils are not secure
in the baskets or
something small has
dropped into the
basket and is loose
Ensure everything is placed
securely in the dishwasher.
Noise!
Motor Hums
Dishwasher has not been used
regularly. If you do not use it
often, remember to set it to fill and
pump out every week. (See Wash
Cycle table). This will help keep the
seal moist.