User manual

10
Using your Baumatic rangehood
Before first use
IMPORTANT: THIS PROCESS MUST BE FOLLOWED BEFORE
THE RANGEHOOD IS USED FOR THE FIRST TIME.
o You should use a good quality stainless steel cleaner and polish
on ALL of the stainless steel areas of your rangehood, before it is
used for the first time.
o This will help to leave a silicone water-resistant film to protect
the stainless steel surfaces.
To use your rangehood
o A = ON/OFF button
o B = Speed selection buttons
o C = Light on/off button
= Low speed
= Medium speed
= High speed
o Before operating the hood, make sure that it has been installed
by a suitably qualified person, as per the information contained
in Baumatic’s installation instructions.
o Find the control panel, which is located at the front right of the
canopy.
o There are several buttons on the control panel, which perform
separate functions.