User manual

18
2) Drill 3 x 8mm holes to hold the canopy bracket, ensuring that it is
positioned to accommodate the minimum clearances of the hood
above the hob (700mm). Screw and tighten the bracket onto the
wall with the screws & rawl plugs provided.
NOTE: We supply a generic set of fixings that are not suitable for
every type of wall. Please ensure the correct screws and rawl plugs are
used. This will depend on the wall the hood is to be installed on.
3) Attach the canopy to the canopy bracket.
4) Then secure the two screws inside the hood to prevent movement.
Screw plug
Wall bracket
Screw
(4mm x 30mm)
Holes on wall
Wall bracket
Rangehood