User manual

21
11) Take the lower chimney section wall fixing bracket (E) and place
it between the two pencil marks that you made in step 9
o Keeping the bracket in contact with the wall, use a pencil to
mark on the wall the anchoring holes that are cut out of the
bracket.
12) Using an 8 mm drill bit, drill out two holes
on the pencil markings that you made in step
11. Insert rawl plugs into the holes and then
use a screwdriver to secure the lower chimney
fixing bracket to the wall.
o Refit chimney section (C) to the hood and fix it onto the hood
using the two screws (4x8) that are supplied.
Upper chimney
Lower chimney