User manual

19
Delay start feature
Your appliance has a delay start feature, which allows you to pause
the start of a wash cycle until a later time.
9 Follow the process listed under “Selecting a wash program”
9 After pressing the Start/Stop button, immediately press the
Start/Stop button again.
o The LCD display will show 3:00 (indicating that the wash cycle
will start in three hours time).
o If you hold down the Start/Stop button then the time delay will
increase in one hour intervals (4H, 5H, 6H etc.). The LCD will
continue to increase in one hour intervals until it reaches twenty
fours hours. The LCD display will then show 0.00.
o If you continue to hold down the Start/Stop button at this point,
the time delay will return to 1.00 and will then increase in 30
minute intervals (1.30, 2.00, 2.30 etc.), until it reaches 3 hours.
It will then return to increasing in one hour intervals until it
reaches twenty fours hours. At this stage it will again return to
0.00 and no delay start will be set in the machine.
9 Once the LCD display shows the delay interval that you require,
let go of the Start/Stop button. After a few moments the LCD
display will begin to flash and show the delay interval that you
have set.
9 The machine should not be turned off at this stage as the delay
start will not be remembered by the machine when it is switched
back on.
9 Once a delay start has been set, you cannot alter the delay
interval without cancelling it.
9 To cancel the delay start feature, you should press and hold
down the Start/Stop button until the LOCK DOOR and READY
END lights come on. You will then be able to operate the
machine as normal.