Instruction manual

Description of the product features
1) Control panel
o The control panel is located at the top of the appliance, behind
the glass door. This means it is easy to set the temperature of
the appliance and see what temperature the appliance is set to.
2) Two cooling zones
o There are two cooling zones inside of your wine cooler; they are
separated by a partition.
o Each cooling zone has an independent temperature control and
temperature display.
3) Interior light
o Each cooling zone has an interior light. The light can be switched
on and off by using the light ON/OFF buttons (F) and (K).
4) The wine cooler shelves
o The full depth shelves will fit onto the telescopic runners.
Using your Baumatic wine cooler
Before switching on
o Make sure that it has been installed by a suitably qualified
person, as per the information contained in Baumatic’s
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
9