Operation Manual

17
Wash program guidance
o 1) A program option can only be selected if the wash program chart
indicates that this is possible.
o If you use the “Rapid wash” and Extra rinse” program options
simultaneously, then they will cancel each other out.
o The washing machine will automatically select a spin speed for a
particular wash program. However it is possible to alter the spin
speed by using the “Spin selection button”.
o Important: You should make sure that the selected spin speed is
appropriate for the garments that you are washing.
o If you use the spin selection button, you can make the machine not
go into a spin cycle. If you pick this option, then the machine will
stop with water in the drum.
o Important: Before opening the door of the appliance, you MUST
select the drain program to clear this water.
o 2) The LCD display shows an approximate time for the selected
wash cycle. Please note that factors external to the machine, e.g.
the temperature of your water supply, your water pressure etc. can
affect the time it takes for the wash cycle to complete.
o The “Level of fill” section of the program chart, gives an indication
of how full you should fill the drum on each specific wash program.