Operation Manual

Changing a wash program
o If you have accidentally selected the wrong wash program, then
it is possible to change it to the correct one.
9 Press the START/STOP button to interrupt the wash cycle.
9 Turn the program selection knob to the wash program that you
wanted to select originally.
9 Select any relevant program options using the four buttons
underneath the LED display.
9 Press the START/STOP button.
Please note that this process must not be
used to cancel a wash program. You should
follow the “Cancelling a wash program”
section to do this.
o If the program selection knob is turned mid wash cycle without
the “Changing a wash program” process being followed. Then
the originally selected wash program will continue and complete
as normal.
o The LCD display will show the letter P and the number of the
wash program that you originally selected.
20