Operation Manual

Water supply

9 Connect the other end of the inlet hose to your mains water supply

ts to your mains water supply. The inlet

inlet

Water outlet

9 Connect and fully tighten the inlet hose to the top right hand corner

of the washing machine.

9 IMPORTANT: There should be a filter that sitting inside the end of

the inlet hose that connec

hose may leak if this filter is missing. This filter is supplied with the

appliance, you should contact Baumatic to obtain one, if it is

missing.

Tighten the inlet hose to your mains supply fully, but do not over

tighten as this may distort the filter that sits in the end of the

hose.

9 Test for any leaks.

9 Secure the drain hose, so that it cannot move whilst the washing

machine is in use.

9 Place the end of the drain hose on your drain pipe. Push it a

9 ot insert the drain hose too deeply into the

9 SE FROM ITS ORIGINAL

LENGTH.

short way down into your drain pipe.

IMPORTANT: Do n

water pipe, as this may cause siphoning.

NEVER EXTEND THE DRAINAGE HO