Operation Manual

o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
Touch controls
o All operations are performed by means of the touch controls that
can be found on the control panel.
o Each touch control has a visual display that corresponds to it.
Switching a zone on
o Each individual zone has an ON/OFF button (2).
o Press the ON/OFF button of the cooking zone that you wish to
use. A hyphen will appear on the cooking zone indicator that is
above the plus and minus button of the zone that you are
setting.
o A power level must be selected within one minute of a zone
being switched on, otherwise the hob will return to stand-by
mode
o Press the plus button (4) and the
number 5 will appear in the cooking
zone indicator. Use the plus and
minus buttons until the power level
that you require appears in the
cooking zone indicator.
o If you wish to switch on another zone whilst another is already in
use, simply press the ON/OFF button for the zone in question.
o IMPORTANT: WHEN MULTIPLE COOKING ZONES ARE
BEING USED. IF THE POWER OUTPUT GOES ABOVE A
CERTAIN LEVEL, THEN THE POWER OF PARTICULAR
ZONES MAY BE REDUCED. THIS DOES NOT INDICATE THAT
YOUR HOB IS FAULTY.
11