Operation Manual

Turning off a zone
o Press the ON/OFF button of the zone that you wish
to switch off. After a few seconds the zone will
switch off.
o If you have other zones that are still in use, then
they will not switch off.
o Before leaving the hob unattended, you must ensure that all of
the cooking zones are switched off. Press the minus button (3)
until the zone reaches zero.
o The zone will switch off immediately.
Residual heat indicator
o After a zone is switched off, the corresponding
cooking zone indicator will show a flashing letter
“H”. This means that the temperature of the zone
is over 60°C and is therefore high enough to cause
injury.
o IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut.
Locking the hob top
o The whole hob top can be locked by
pressing the safety lock button (5) whilst
the appliance is turned on.
o A neon above the safety lock button will light to show that the
safety lock feature has been switched on.
o When the safety lock feature is activated, it will disable any of
the other buttons on the control panel.
o To disable the safety lock feature, you should press the safety
lock button (5) for a few seconds. The safety lock neon will go
out and you are then able to adjust the power of any zone on
the hob top.
12