Operation Manual

These User Instructions should be retained for future reference and for use by a person who is
perhaps unfamiliar with the appliance.
The symbols on the Control Panel fascias show which burner the Control Knob operates.
Dependent on the model there are two methods for igniting the burners.
Auto Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame symbol,
the ignition spark will operate as long as the knob is pressed down. When a flame has been
established the knob can be released.
Manual Ignition
After pressing in and turning the appropriate knob anti-clockwise to the large flame symbol,
press the ignition button located on the control panel. The ignition spark will operate as long
as the button is held down. When a flame has been established, release the button.
To regulate the flame, continue turning anti-clockwise to the required setting between the large and
small flame symbols.
To turn the burner off, turn fully clockwise.
When a Thermocouple Safety Device is incorporated in the appliance, it is necessary for the knob
to be continuously held down for a further period of approximately 10 seconds after the flame has
been established to enable the thermocouple to function. The Safety Device is designed to stop
the flow of gas to the burner head in the event of a flame out situation.
30