Specifications

AUTOMATIC PROTECTION MECHANISM (ERROR CODES)
If the oven senses an error it will stop working and display an error code. If you see one of the below
error codes you should stop using your appliance. You can leave the door closed and leave your food
inside, and there is no need to unplug your appliance. Please wait for the microwave to return to normal
working order. When the microwave has returned to normal working condition it will stop beeping and
the error code will disappear. You can then use your appliance
NOTE: You may need to reprogram the cooking programme you were using.
1. If the system enters into super high temperature protection status, the digital display shows “E01”
and continues to beep until the system comes back to normal condition.
2. If the system enters into super low temperature protection status, the digital display shows “E02”
and continues to beep till the system comes back to normal condition.
3. The system enters into protection mode when the system sensor is Short Circuited. The display
shows “E03” and continues to beep until pressing “STOP/CANCEL” button. Call consumer service
to check and replace the faulty sensor.
COOLING FEATURE
The controlling system of the microwave oven has the feature of cooling. As for any cooking mode which
cooking time above 2 minutes, after finishing cooking, the oven fan will continue to work for about 3
minutes to cool the oven.
If the error codes 1 or 2 are still present after 30 minutes you should turn off the appliance and contact
Customer Services. Please note that a faulty electrical connection or inadequate provision for ventilation
is the responsibility of the owner.
11