User manual

30
and through the rear panel of the control panel. Turn the screw
anticlockwise to decrease the flow.
o Adjust the bypass setting until the correct flame size is achieved.
o Refit the control knob, then turn it to the Max position and then
back to Min several times, checking that the flame is maintained.
o Fully open and close the oven door several times and check that
the flame is maintained.
o Turn the appliance off and disconnect it from the gas supply.
o Re-assemble the appliance, reinstall it and then carry out a full
function test (this should include a gas tightness test).
My appliance isn’t working correctly
The gas oven burner or grill burner do not light.
* Check that the oven is switched on at your mains supply.
* Check that the fuse in the spur outlet doesn’t need replacing.
* Check that there is not a problem with your gas supply
Food is cooking too quickly or too slowly.
* Check that you are cooking at an appropriate temperature and
shelf level.
The oven is not cooking evenly.
* Check that the oven is installed correctly.
* Check that you are cooking at an appropriate temperature and
shelf level.
The oven light does not work.
* Follow the “Replacing the oven bulb” section on page 18.