User's Manual

14
Whilst ”dur” is flashing, use the control knob (1) to adjust the time.
The default time is 30 minutes. The minimum countdown time that
h and
can be set first. You can then proceed to set the time of minute.
seconds. The whole countdown
time will flash in the LED display (5) for a few seconds, and then
a few seconds the LED display will return to showing the
me of day, but the timer symbol (3), oven in use symbol (9), and
e automatic cooking symbol (8) and
the oven in use symbol (9) will flash. The audible signal will sound
IMPORTANT: Remember to turn the oven function selector knob to
the off position (“0”) after each use.
o
Turn the knob right (plus) to increase the time and left (minus) to
decrease the time.
o
can be set is 1 minute; the maximum countdown time is 240
minutes (4 hours).
o When you start adjusting the time, the hour of time will flas
o Push the control knob to change between hours and minutes.
o When the correct time is shown on the LED display, release the
control knob (1) and wait a few
the time will stop flashing. The duration timer will be set and will
begin its countdown immediately.
NOTE: After
ti
the automatic cooking symbol (8) will still be activated in the LED
display (5).
o At the end of the countdown time the oven will stop heating, an
audible signal will sound and th
for a few minutes before switching off or you can silence it by
pressing the control knob (1).
o