User manual

Oven programmer/timer
12
bol
symbol
ol
= Programme button
= Plus button
oven
1 = Automatic cooking sym
2 = Oven in use symbol
3 = Decimal point
4 = Minute minder symb
5 = Minus button
6
7
Initial set-up of your
Setting the time of day
After your appliance is connected to your mains supply for the first
supply for the first
time (or after a power cut), the digits on the LED display and
programme button (6) for a couple of
seconds. The automatic cooking symbol will go out and the
o Whilst the decimal point symbol (3) is flashing, use the plus (7)
e the plus and minus buttons and wait a few seconds. The
decimal point symbol will stop flashing and the oven is ready to
use.
time, you must set the time of day before you can use the oven.
o When the oven is connected to your mains
the automatic cooking symbol (1) will flash.
o Press and hold down the
digits will remain steady.
and minus (5) buttons to set the correct time of day.
o When the correct time of day is shown on the LED display,
releas