User manual

28
s be 10 mm longer than the
line conductors.
at the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
e accessible by removing the terminal block
cover. You should remove the cover screw to access this.
he
connection, 4 and 5 are
e is
nnection.
o
placed in the connection
marked with the
o If you have to change the oven power cord, the earthing
(yellow/green) conductor must alway
o Care must be taken to ensure th
by an appropriate replacement.
o Cable type: H05 RRF 3 core x 2.5 mm²
Connecting the mains supply cable
o The mains terminal block is located on the rear of the oven and
the terminals ar
o The cable connections must be
diagram below:-
made in accordance with t
o 1, 2 and 3 are the live
the neutral connection
and the remaining on
the earth co
o The live wire MUST be
placed in connection
number 1.
o The neutral wire MUST be
placed in connection
number 4.
The earth wire MUST be
o The brass links must be positioned as marked in the diagram
above and once established ALL terminal screws must be
symbol.
tightened down firmly.