User manual

29
If when the oven is first switched on, it does not function
uld be done
before contacting the Customer Care Department.
o
o he cable can be looped if necessary, but make sure that is not
en is in position. Care must be
taken to avoid the cable being in contact with hot parts of the
eplacing the mains supply cable
le is damaged, then it must be replaced with a
uitable replacement.
mains supply cable should be replaced in accordance with the
o Unscrew the terminal screws fixing the cable.
o ce
with the specification given on page 28.
minal
o
correctly, you should recheck that the terminal screws are
all fully tightened between the links. This sho
IMPORTANT: The appliance must NOT be connected to the
mains supply by means of a 13A plug and socket.
T
kinked or trapped when the ov
appliance.
R
If the mains supply cab
s
hT e
following instructions:-
o Switch the appliance off at the socket.
o Open the terminal block on the back of the oven.
Replace the cable with one of the same length and in accordan
o The “green-yellow” earth wire must be connected to the ter
marked . It must be about 10 mm longer than the live and
neutral wires.
o The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).