User manual

Description of the product features
1) Shelves
9
o The shelves may be placed in any of
the guide slots within the interior of
the appliance. They are protected from
sliding out.
o To alter the shelf position: Lift the
shelf and pull it towards you until it
reaches the crack in the guide slot. At
the guide interruption point, the shelf
may be adjusted to the height of your
choice. Push the shelf all the way in to
the rear end of the guide slot.
o To remove a shelf: Lift the shelf and pull it towards you (1) until
it reaches the crack in the guide slot. At the guide interruption
point, lift the left side of the shelf up (2) and pull it out from the
appliance in the inclined position (3). Reinsertion is carried out
in the opposite procedure.
2) Defrost water outlet
o The interior of the refrigerator is cooled by the cooling plate that
is on the rear wall. Beneath this there is a channel and an outlet
for the defrost water.
o It is important that this channel never becomes clogged (see
“Defrosting the refrigerator compartment” for a detailed
explanation of how to keep the channel clear).
3) Crisper drawer and cover
o The crisper drawer is in the bottom of your refrigerator and there
is a cover that goes over it.
o The cover helps to prevent fruit and vegetables from drying out
prematurely.
4) Butter compartment
o The butter compartment should only be used for storing packs of
butter or margarine.