BR110 102 Litres Built under freezer He
USER MANUAL FOR YOUR BAUMATIC BR110, 102 Litres Built under freezer NOTE: This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference. for you or any person not familiar with the operation of the appliance.
Contents Environmental note 4 Important safety information 5–6 Specifications of your freezer Dimensions Description of the appliance 7–8 7 8 Using your Baumatic freezer Before switching on During first use Switching on the appliance and setting the thermostat Control Panel 9 -11 9 9 10 11 The freezer compartment Tips on freezing Making ice cubes Freezing fresh food with fast freeze 11-14 12 12 13 Saving energy when using your freezer 13-14 Cleaning and maintenance freezer compartment Defrosting
Environmental note Note: Before discarding an old appliance, switch off and disconnect it from the power supply. Cut off and render any plug useless. Cut the cable off directly behind the appliance to prevent misuse. This should be undertaken by a competent person. Disable the door lock to make sure that children cannot get stuck inside the appliance.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the information contained in this booklet, please contact the Baumatic Advice Line. IMPORTANT: Any installation work must be carried out by a qualified electrician or competent person. Use of the appliance o Your appliance is only designed to be used in the home.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket. o Do not pull out or insert the plug with wet hands. o Do not attempt to use your appliance outdoors or any place where it is likely to come into contact with the elements.
Specifications of your freezer Dimensions of appliance Dimensions of aperture* Height: Width: Depth: Height: Width: Depth: o o o o o o o o o o o 818 - 870 mm 596 mm 550 mm 820 – 870 mm 600 mm 600 mm (min) Freezer star rating **** Manual defrost Adjustable thermostat Temperature rise warning indicator Fast freeze switch Fast freeze indicator light 3 Transparent freezer drawers Reversible door Door on door fittings Adjustable feet Ice cube tray Cubic capacities o Gross capacity: o Net capacity: 102
IMPORTANT: When you install your appliance it is important to bear in mind its climatic rating. In order to find out the climatic rating of your appliance, you should check the rating plate. The rating plate is located on the front left edge of the inside of the fridge. You will need to open the door of your appliance to be able to find it. The rating plate will indicate the ambient temperature range that your appliance will function correctly within.
Using your Baumatic freezer Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eight hours before connecting the appliance to your mains supply. This will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
Switching on the appliance and setting the thermostat You switch on your appliance by connecting it to your mains supply and setting the thermostat. The thermostat control knob is located at the top of the appliance. o The thermostat automatically regulates the temperature inside the freezer, depending on what number you have turned the thermostat control knob to:o Position <0> means that the appliance will not cool. However the light will still function.
Control panel 1. 2. 3. 4. 5. Thermostat control dial. Super freeze switch Power indicator light Temperature warning light Fast freeze indicator light o Power light (Green) - will light up as soon as the appliance is connected to your mains supply. o Fast freeze light (Yellow) - will light up when the fast freeze switch has been activated. o Temperature rise warning light (Red) - will light up when the appliance detects a rise in temperature that could affect the contents of your freezer.
Tips on freezing o Freezer bags, polythene wraps, aluminium foil (extra thick) and special cans for frozen foods are suitable packaging for storing frozen goods in. o Tape, rubber bands or plastic clips are suitable for sealing bags and wrappings. o Before sealing a suitable bag, you should compress the air out of it, as this will help the food to freeze more easily. o Flat packages freeze more easily. o If you are freezing liquid, then do not fill the container to the brim.
Freezing with fast freeze This function should be used whilst you are freezing fresh food, it will ensure that a powerful supply of cold air enters the freezer compartment. o Press the fast freeze switch (2) and the freezer will start to run continuously at its maximum setting. o The yellow fast freeze light (5) will come on when the fast freeze setting has been switched on. o There is no need to adjust the thermostat knob.
Cleaning and Maintenance: o Occasionally clean the condenser coils (if present) at the back of the appliance to maintain a high performance level. o Defrost the appliance regularly. A build up of thick ice decreases the efficiency of the appliance. You should defrost whenever the frost reaches 5 mm thickness. o Clean the door gasket with warm water or a neutral detergent that leaves no residue. A tight-sealing door gasket is critical to the efficiency of your appliance.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT. o Do not clean the appliance by pouring water onto it or spraying water over it. o The freezer should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water. o Clean the accessories separately with soap and water. Do not clean them in a dishwasher. o Do not use abrasive products, detergents or soaps.
o Whilst defrosting the appliance, the food should be removed from the freezer and wrapped in several layers of paper and stored in a cool place. The foods rise in temperature will shorten its storage life and therefore the food should be used within a relatively short period of time. o DO NOT PLACE FOOD BACK IN THE FREEZER ONCE IT HAS STARTED TO THAW. o Set the thermostat knob to position <0> and disconnect the appliance from your mains supply. o Leave the door to the freezer open.
Installation IMPORTANT: Before installation and usage read all the instructions and make sure that the voltage (V) and the frequency (Hz) indicated on the rating plate are exactly the same as the voltage and frequency in your home. The rating plate can be found on the front left edge of the inside of the freezer.
Positioning o It is advisable that your appliance is only installed in a location where the ambient temperature of the room, corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.
Reversing the door of your appliance This procedure MUST be completed before the furniture door is attached. Any parts that you remove from the appliance whilst reversing the door, should be retained for later use. WARNING- Take care when opening the hinges, they are sprung loaded and there is the risk of injury if they close on your hand. Tools required:o Phillips screwdriver o Flat bladed screwdriver o Slacken the retaining screws (1) on the appliance and then carefully remove the appliance door.
o Lever off the cover caps (3). o Insert the retaining screws (1) into the opposite side of the appliance from their original position. These screws should be partially tightened but not fully tightened. o Remove the door retaining screws (2) and then reverse the position of the top and bottom hinge (as shown in the diagram on page 18). o Reattach the appliance door and then fully re-tighten the retaining screws (1) and the door retaining screws (2).
Aperture dimensions The diagram below shows the aperture size that you will need to be able to install your appliance. o The appliance must be stood on a level floor. You can use the levelling feet to take into account any minor unevenness in the floor. Adjusting the plinth/kickboard When the appliance has been placed underneath the worktop, you may decide to attach a plinth or kickboard to match your existing kitchen units.
o Use a spanner to adjust the height of the adjustable feet. o If your aperture has a height of 820 mm, then the adjustable feet should be fully tightened. o If your aperture has a height of 870 mm, then the adjustable feet should be set at a height of 50 mm. o The appliance should be flush with the underside of the worktop and be level. IMPORTANT: If the appliance is not level, then the door and door seal may be affected. o A cut out must be made in the plinth/kickboard for ventilation.
Fitting the furniture door to the appliance If you need the appliance door to open from the other side, then please reverse the door before commencing the installation process. (See “Reversing the door” section). Tools required:o o o o Tape measure Sharp pencil Small flat bladed screwdriver Spanner IMPORTANT: We recommend that two people install this appliance. a) Undo the screws from the two adjusting bolts that are located on the top of the appliance door and then remove the mounting bracket (1).
o Place the mounting bracket (1) on the reverse of the furniture door. o The middle of the mounting bracket should be positioned on the line that you have just drawn. Please note the position of the mounting bracket in the above drawing, to ensure that you have the mounting bracket the correct way up. o The top of the mounting bracket should be positioned approximately 15 mm from the top of the furniture door.
c) Hang the furniture door onto the appliance door, making sure that the brackets on the mounting bracket locate over the adjusting bolts. c) Use a screwdriver to adjust the gap on the lower section of the adjusting bolts. The gap should be set to approximately 9 mm (as shown in the above drawing). d) Fix the lower bracket to the bottom of the furniture door and the underneath of the appliance door (as shown in the drawing on the previous page).
f) Open the appliance door. o Use a suitably sized drill bit to drill through the holes in the bracket, into the work top. IMPORTANT: The drill bit should be appropriate for the material that your work top is made from. o Secure the bracket to the underside of the worktop, using the screws provided. IMPORTANT: These screws should be fully tightened. o If the appliance is being installed under a granite worktop, use the L shaped brackets provided to secure the fridge to the side of the cabinet.
Troubleshooting IMPORTANT: If your freezer appears not to be operating properly, before contacting the Customer Care Department, please refer to the checklist below. My freezer does not appear to be working/there is no power to my appliance. o Check that the plug is fully inserted into the power socket. o Check that there is power to your mains supply (e.g. that there hasn’t been a power cut or that the fuse hasn’t blown).
Ice has quickly formed on the inner back wall of my freezer o Check that food has not been pushed too far back inside the appliance, so that it is in contact with the inner back wall. IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact Baumatic Customer Care on telephone number (0118) 933 6911. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF.
Baumatic Consumables o BC001 Degreaser for Dishwashers (200 g) o BC002 Descaler for Washing Machines and Dishwashers (200 g) o BC003 Ceramic Hob Cleaner (250 ml) o BC004 Oven Cleaner (250 ml) o BC005 Stainless Steel Cleaner and Protector (250 ml) o BC007 E-Cloth – General Purpose Cloth o BC008 Microwave Cover To order a Baumatic consumable product please call 0123 5437 244 and quote the product code. You can also order online from eshop.baumatic.co.
Technical Data Manufacturer Model Number Product Category Energy Efficiency Class (1) Annual Energy Consumption (2) Storage Volume of Fridge Compartment Storage Volume of Freezer Compartment Star Rating Frost Free Compartments Temperature Rise Time Freezing Capacity Climate Class (3) Noise Level Installation Type BAUMATIC LTD BR110 8 – Upright Freezer A+ 183 kWh 100 litres 4 11 hours 4.5 kg/24hr N, ST 41 dB Built-in (1) On a scale from A+++ (highest efficiency) to G (lowest efficiency).
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 437244 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.co.uk customercare@baumatic.co.uk spares@baumatic.co.uk technical@baumatic.co.uk Website: www.baumatic.co.uk Facebook: www.facebook.com/baumatic.
31
